Steel & Iron (Ferrous) scrap prices in Tulsa, OK
What yards in Tulsa, OK pay for Steel & Iron (Ferrous) scrap, averaged from 1 local yard and updated every business day. If local coverage is limited, nearby locations in Oklahoma fill the gap.
Real-time price changes from verified scrap yards around Tulsa, OK.
-
1 week ago↑ $202 / ton (Tulsa, OK)
-
1 week ago↑ $202 / ton (Tulsa, OK)
-
2 weeks ago↑ $179 / ton (Tulsa, OK)
Scrap Steel & Iron (Ferrous) prices in Tulsa, OK by grade (per ton)
Industrial and structural Steel & Iron (Ferrous) averages $190/ton in Tulsa. Mill and shredder demand dictates these rates, which are currently remaining stable. Suppliers equipped to torch or shear material to prepared sizes access higher tiers — with Plate & Structural Steel (P&S) payouts reaching $286/ton.
| Metal grade | Local average | Price range | Trend (7 days) |
|---|---|---|---|
| Plate & Structural Steel (P&S) | $286/ton | $224 – $336/ton | Stable |
| Automotive Cast Iron (Rotors/Drums) | $280/ton | $157 – $381/ton | Stable |
| #2 Prepared Steel | $230/ton | $179 – $291/ton | Stable |
| #1 Prepared Steel (HMS) | $216/ton | $134 – $291/ton | Stable |
| Light Iron & Shredder | $209/ton | $90 – $336/ton | Stable |
| Unprepared Steel (Torch & Shear) | $190/ton | $67 – $291/ton | Stable |
| Cast Iron (Heavy) | $188/ton | $90 – $314/ton | Stable |
| Tin (Sheet Metal) | $165/ton | $90 – $224/ton | Stable |
| Steel Turnings | $94/ton | $45 – $134/ton | Stable |
| Rebar | $55/ton | $45 – $157/ton | Stable |
Tulsa currently lists 10 Steel & Iron (Ferrous) grades, based on quotes from 1 active yards. Week-over-week the segment is little-changed — every tracked grade printed flat versus last week.
Steel & Iron (Ferrous) scrap prices at yards in Tulsa, OK
Compare Steel & Iron (Ferrous) scrap buy prices from yards in Tulsa, OK below. Coverage varies by grade and yard — if you do not see your metal or the price looks stale, call the yard for a live quote before you haul.
-
Last updated: Nov 12, 2026
- #1 Prepared Steel $202/ton
- #2 Unprepared Steel $202/ton
- Shred/Tin $202/ton
Steel & Iron (Ferrous) scrap FAQ
How much are scrap yards paying for Plate & Structural Steel (P&S) right now?
Plate & Structural Steel (P&S) pays $286/ton in Tulsa — one of the top Steel & Iron (Ferrous) grades. Clean, sorted loads hit the high end.
What does Automotive Cast Iron (Rotors/Drums) sell for at Tulsa scrap yards this week?
Expect around $280/ton for Automotive Cast Iron (Rotors/Drums) in Tulsa. Clean, high-volume loads negotiate above the listed average.
What is the going rate for #2 Prepared Steel in Tulsa?
In Tulsa, yards are paying about $230/ton for #2 Prepared Steel. Check the 7-day trend above before you haul.
Which Steel & Iron (Ferrous) scrap grade has the lowest buy price right now?
Rebar pays about $55/ton in Tulsa — the bottom tier for Steel & Iron (Ferrous). Ask your yard what specs upgrade a mixed load before you haul.
What's the difference between top and bottom Steel & Iron (Ferrous) scrap prices this week?
Wide spread on Steel & Iron (Ferrous) in Tulsa: $55/ton (Rebar) to $286/ton (Plate & Structural Steel (P&S)). Yards pay more for pre-sorted loads when the gap is this big.
Is the Steel & Iron (Ferrous) scrap market trending up or down in Tulsa?
Steel & Iron (Ferrous) in Tulsa is remaining stable. Sell when it fits your schedule — flat market, no urgency.
Why does steel pay so much less than copper at the scrap yard?
At about $286/ton in Tulsa, steel pays off in bulk, not small trips. Rule of thumb: under a few hundred pounds, combine it with a non-ferrous load.